FEICHAO LiteRadio OpenTX 2.4G 8CH Radio Transmitter with Mobula6 1S 65mm Tinywhoop Drone 19000KV / 25000KV Frsky Version w/ 1219 Propeller 6 in 1 Charger

• LiteRadio 8CH Radio Transmitter: Supports for Frsky protocol, easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC)
• Mobula6 1S Drone Motor: SE0802 KV25000(Race Edition) ; SE0802 KV19000(Regular Edition) ; Onboard 4in1 ESC : Support BLHeliSuite Programmable ; Default protocol: DSHOT600 ; MCU upgraded to EFM8BB21
• Happymodel 6 in 1 Charger: Supports Picoblade 1.25, PH 2.0mm battery; Supports LiHV 4.35v battery
• Gemfan 1219 3-blade Propeller : 1mm Hole CW CCW for 0703-1103 RC Drone Brushless Motor.
• Tips: There are 4 different package choices, all Frsky version, please kindly check before order.

Product detail:

FEICHAO LiteRadio OpenTX 2.4G 8CH Radio Transmitter with Gimbal Compatible for Frsky D8, D16 FCC, D16 LBT for FPV Racing Drone
Frequency Range: 2.4G (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
System: Bayang Protocol / Frsky Protocol
Power: 80mw
Model Type: Multi-rotor
Support USB Charging
Support FPV Simulator Connected
Output: PPM, support Student Radio Mode
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: 350mAh 2S Battery
Weight: 227.4g (with battery)

Happymodel Mobula6 1S 65mm Brushless Tiniwhoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTXFrsky Verion
Flight controller:
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection

Happymodel 6 in 1 3.7V 3.8V 1S Lipo LiHv Battery Charger Board for Tiny 6 7 QX65 Happymodel Mobula7 Mobula 7 Mini RC Quadcopter FPV Racing Drone Parts
– Supports Picoblade 1.25, PH 2.0mm battery
– Supports LiHV 4.35v battery
– Supports 6 Batteries charged at the same time
– The display shows the each channel input and output voltage in order.
– Charge at either 200mA or 600mA according to the setting of a switch that can be set independently for each port.
– 2-6S (7.4V-22.2V)as power supply or use adapters with at least 2A battery output.